Production DescriptionMeiyuan T-FG801R Fiberglass Cloth Aluminum Foil Tape is made of fiberglass cloth composite aluminum foil veneer coated with high-performance solvent-based pressure-sensitive adhesive and protected by single-sided PE coated silicone release liner.Features¨ Outstanding Vapor Barrier ¨ Extremely High Mechanical Strength¨ Oxidation Resistance ¨ Strong Cohesion, Corrosion ResistanceApplicationsSuitable for pipe sealing splicing and heat insulation and vapor barrier of HVAC duct and cold/ hot water pipes, especially the pipe sealing in shipbuilding industry. Technical Data Sheet
|Total Thickness (without liner)||μm||155||PSTC-33 / ASTM D3652|
|Peel Adhesion (180°)||N/25mm||≥ 12||PSTC-1 / ASTM D3330|
|Tack Rolling Ball||cm||≤ 20||PSTC-6 / ASTM D3121|
|Tensile Strength||N/25mm||≥ 200||PSTC-31 / ASTM D3759|
|Elongation||%||≥ 2.0||PSTC-31 / ASTM D3759|
|Application Temperature||°C||10~ 40||----------|
|Heat Resistance||°C||-20~ 120||----------|
Shelf life: One year from shipment date when stored at 21°C (70°F)/ 50% RH out of direct sunlight.
- The data above are typical results and subject to change without notice.
- Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.
- The product should be stored at room temperature and kept from wet and heat source.
- It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
- The user should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for user's special purpose and technique.
JIANGYIN MEIYUAN INDUSTRIES CORPORATION Address: No.11 Songwentou Road, Yunting Industry Zone, Jiangyin City, Jiangsu Province, China Postcode: 214400Website: www.meiyuan.com